teensy

<-- all details about my Computer+BASIC project -------------------------------- <-- tout les details sur mon projet d'ordinateur et de son BASIC The current work in progress (made an enclosure) --> -------------------------------- Le travail continue...

Hi, I haven't post for a while... Because I'm writing a -from scratch- uBASIC Interpreter for the Teensy 3.6 PRJC MCU, It's featuring buitin SDCard, small LCD, USB Keyboard, 3 LEDs & soon 3 user buttons.... --------------------------------------- Salut,...

Hi, after some code tunes (on the XTBP & X-07) & new cable made : the 'X-07 com' mode works ! So my X-07 is now able to control the XtsTinyBasicPlus board ! As it was the initial aim of the project, I'm relatively glad ;) But now that my board do much...

Today, I finished the enclosure for my XtsTinyBasicPlus board ! the current built in a box As I said in my previous article, I re-used an old 2.5 inch HDD enclosure to make my box. I'm glad with the result, I also upgraded the code with an experimental...

Today, I started to design a mainboard & an enclosure for my build... Enclosure design that forced me to think my mainboard as is... As I re-used an existing HDD enclosure, I designed my workspace in 3D to make decide the final mainboard layout. empty...

Hi again, This time I decided to gearUp about microcontrollers & try a teensy ++2 board : 128K prgm / 8K ram / 32u4 mcu against regular arduino 32K prgm / 2K ram / 32u4 mcu The aim of this project is to connect my Canon X-07 to a more powerfull shell...